100ton Hydraulic Molding Press Machine OH(Double-action press)
Heating/cooling press molding machinesHot press molding machinesResin press molding machinesUsed press molding machines

This is a used hydraulic molding press that has been refurbished.
The machine body has been overhauled, while a newly manufactured control panel and hydraulic unit have been installed.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.An oil drip tray is installed beneath the hydraulic unit to minimize potential damage caused by oil leaks
3.Hydraulic pressure and machine operating speed can be adjusted via the touch panel.
For information on our current used machine inventory, please refer to the used machine inventory list below.
| Product (application) | Rubber/Resin Molding |
| Output (ton) | 100ton |
| Stroke | 300㎜ |
| Open height | 300㎜ |
| Platen size | □510㎜ |
| Cylinder | φ250㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 2~20㎜/s |
| Heater temperature | 300℃ |
| Hydraulic motor capacity | 5KW |
| Heater capacity | 10.8KW(5.4KWx2) |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 2700㎜x2130㎜x2000㎜ |
| Management number | 095 |


