50ton Hydraulic Molding Press Machine
Powder press molding machinesResin press molding machines

This press machine is specifically designed for powder compaction.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.Machine operating speed and pressure can be adjusted using the flow control valve and pressure control valve located on the operator side.
3.Replaceable mounting plates are installed on both the upper and lower platens. When worn, these plates can be removed and resurfaced.
| Product (application) | Powder Molding |
| Output (ton) | 50ton |
| Stroke | 250㎜ |
| Open height | 250㎜ |
| Platen size | □400㎜ |
| Cylinder | φ180㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 3~20㎜/s |
| Hydraulic motor capacity | 5KW |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1150㎜x1753㎜x1600㎜ |
| Management number | 094 |


