70ton Hydraulic Molding Press Machine (two-stage type)
Heating/cooling press molding machinesHot press molding machines

A two-stage hydraulic molding press that enables simultaneous molding on two separate platens.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.Adjustment springs are installed on both the upper and lower stages to synchronize the clamping and release timing of the upper and lower platens.
3.All automatic operation parameters, including pressurization, degassing, and pressure release, can be freely configured via the touch panel.
| Product (application) | Rubber Molding |
| Output (ton) | 70ton |
| Stroke | 200㎜ |
| Open height | 100㎜x2 |
| Platen size | □400㎜ |
| Cylinder | φ210㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 2.5~28㎜/s |
| Heater temperature | 200℃ |
| Hydraulic motor capacity | 5KW |
| Heater capacity | 16KW(4KWx4) |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1345㎜x1950㎜x1300㎜ |
| Management number | 096 |


