150-ton Four-Stage Heating and Cooling Hydraulic Press
Heating/cooling press molding machinesHot press molding machinesResin press molding machines

This four-stage hydraulic press enables simultaneous molding on four separate platens.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.Each platen is equipped with three thermocouples for temperature control, minimizing temperature variations across the platen surface.2.
3.The machine allows molded products to be cooled while maintaining applied pressure.3.
| Product (application) | Resin Molding |
| Output (ton) | 150ton |
| Stroke | 160㎜ |
| Open height | 40㎜x4 |
| Platen size | □600㎜ |
| Cylinder | φ300㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 1.2~14㎜/s |
| Heater temperature | 350℃ |
| Cooling method | Steam+Water+Air Cooling |
| Hydraulic motor capacity | 5KW |
| Heater capacity | 60KW(12KWx5) |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 2280㎜x2205㎜x1240㎜ |
| Management number | 093 |

