Used 100-ton Hydraulic Molding Press
Hot press molding machinesResin press molding machinesRubber press molding machinesUsed press molding machines

This is a 100-ton hydraulic molding press operated by manual push buttons.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.The pressure-holding mode and continuous pressurization mode can be switched using a selector switch on the control panel.
3.The heated platen has a maximum operating temperature of 200°C, with temperature accuracy within ±5°C
For information on our current used machine inventory, please refer to the used machine inventory list below.
| Product (application) | Resin Molding |
| Output (ton) | 100ton |
| Stroke | 300㎜ |
| Open height | 300㎜ |
| Platen size | □510㎜ |
| Cylinder | φ250㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 3~20㎜/s |
| Heater temperature | 200℃ |
| Hydraulic motor capacity | 5KW |
| Heater capacity | 8.8KW(4.4KWx2面) |
| Operation | Manual |
| Machine size(widthxheightxdepth) | Approximately 2700㎜x2140㎜x2000㎜ |
| Management number | 090 |


