Feel free to contact us.
+81-567-52-3341
languageENG

Product list

20-ton Hydraulic Press (Powdered Ceramics and PTFE Molding) [Video Available]

Heating/cooling press molding machines

This press machine is specifically designed for powder compaction.

【Features】

1.The machine is equipped with a servo-driven hydraulic motor.

Advantages of the Servo Hydraulic Unit

  • Energy-efficient and low-noise operation, as the pump operates only when required.
  • Significantly reduced energy consumption compared with conventional hydraulic systems.
  • Micrometer-level positioning accuracy enabled by the servo controller.

2.For safety, all four sides of the press are enclosed with safety covers.The cover on the operating side features a sliding shutter that opens and closes vertically. The shutter can be raised during mold installation and changeover operations.

3.The touch panel enables data acquisition of pressure, speed, position, ambient temperature, and humidity.

Please watch the video below to see the machine’s automatic operation.

Product (application)PTFE Molding
Output (ton)20ton
Stroke 550㎜
Open height 650~750㎜
Platen size400×400㎜
Cylinderφ125㎜
Maximum pressure21MPa
Operation speed1~40㎜/s
Hydraulic motor capacity11KW
Operation Manual/Automatic
Machine size(widthxheightxdepth)Approximately 1300㎜ x2600㎜ x1000㎜
Management number049