150-ton Hydraulic Press (Powdered Ceramics and PTFE Molding) [Video Available]
Heating/cooling press molding machines

This press machine is specifically designed for powder compaction.
【Features】
1.The machine is equipped with an inverter-controlled hydraulic motor. By controlling the motor speed, the system regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.Energy savings of 50% or more can be achieved during pressure-holding operation, compared with our conventional variable-displacement piston pump system.
Please watch the video below to see the machine’s automatic operation.
| Product (application) | PTFE Molding |
| Output (ton) | 150ton |
| Stroke | 400㎜ |
| Open height | 360~540㎜ |
| Platen size | 510×510㎜ |
| Cylinder | φ300㎜ |
| Maximum pressure | 21MPa |
| Operation speed | 1~14㎜/s |
| Hydraulic motor capacity | 5KW |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1600㎜ x2200㎜ x2400㎜ |
| Management number | 050 |

