4-ton Double-Action Hydraulic Press
Heating/cooling press molding machines

This is a double-action hydraulic press specifically designed for powder compaction.
【Features】
1.By using two servo motors for control, both the upper and lower cylinders achieve precise control of position and speed.
2.The intermediate platen is also movable in both upward and downward directions, making it easy to remove molded products.
3.By incorporating a hydraulic servo unit directly into the machine, the conventional hydraulic oil tank and solenoid valves are no longer required. This design achieves an extremely compact machine footprint.
4.The combination of servo control and our proprietary control program design achieves optimized machine operation and energy efficiency.
| Product (application) | Teflon(PTFE) Molding |
| Output (ton) | 4ton(Both tightening) |
| Stroke | Upper cylinder 250㎜ Medium cylinder 450㎜ Lower cylinder 250㎜ |
| Open height | Upper 1080㎜ Lower 395㎜ |
| Platen size | 500×640㎜ |
| Cylinder | Upper/Lower φ50㎜ Medium φ40㎜×2 |
| Maximum pressure | 21MPa |
| Operation speed | 2~130㎜/s |
| Servo motor capacity | 4.5KW×2 |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1500㎜ x2800㎜ x1520㎜ |
| Management number | 051 |

