100ton Two-stage hydraulic press molding machine

This is a two-stage hot press machine.
Its two-stage design enables simultaneous molding on two platens.
【Features】
1.1.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
2.All automatic operation parameters, including pressurization, degassing, and pressure release, can be freely configured via the touch panel.
| Product (application) | Resin Molding |
| Output (ton) | 100ton |
| Stroke | 400㎜ |
| Open height | 200+200㎜ |
| Platen size | ▢510㎜ |
| Cylinder | φ250㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 2-100㎜/s |
| Heater temperature | MAX200℃ |
| Hydraulic motor capacity | 5KW |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1750㎜ x2150㎜ x1150㎜ |
| Management number | 061 |

