250ton Vacuum Press Machine(Demo machine)

A 250-ton vacuum hydraulic molding press equipped with a servo-driven hydraulic unit is available for demonstration at our head office factory.
Customers can bring their own molds and materials, and we can conduct trial molding at our facility.
【Features】
1.Capable of applying pressure up to 250 tons under vacuum condition.
2.High-temperature heating capability up to 400°C for molding applications.
3.Servo control enables a stopping accuracy of 0.01 mm.
4.Servo control allows operation speeds to be adjusted from ultra-low to high speed.
5.Energy-efficient operation with reduced power consumption through optimized servo control.
6.Ultra-high-precision specifications with pressure accuracy within 0.05 mm.
【Mold Requirements for Trial Molding】
We do not have molds available for trial molding. Customers are required to bring their own molds.
- Maximum mold dimensions: 600 mm × 600 mm
- Maximum mold thickness: 250 mm
For molds with dimensions of 300 mm × 300 mm or smaller, customers are required to prepare a steel plate to prevent potential damage to the heated platen during pressurization.
- Steel plate requirements:
- Minimum dimensions: 300 mm × 300 mm
- Minimum thickness: 20 mm
Depending on the mold shape and dimensions, some trial molding operations may not be possible. Please contact us if you are unsure whether your mold is suitable.
| Product (application) | Demo machine |
| Output (ton) | 250ton |
| Stroke | 250㎜ |
| Open height | 260㎜ |
| Platen size | 600×600㎜ |
| 金属最大寸法 | 600×600㎜ |
| 金属最大厚み | 190㎜ |
| Main cylinder | φ400㎜ |
| Maximum pressure | 20MPa |
| Heater temperature | 400℃ |
| Slide unit | Heat platen integrated slide |
| Hydraulic motor capacity | 5.5KW |
| Heater capacity | 7.5KW |
| Operation | Manual/Automatic |
| Management number | 052 |

