50ton Press molding machine (Vacuum Heating, Cooling)

This press machine is designed for molding both thermoplastic and thermosetting resins.
【Features】
1.Vacuum press molding prevents air bubbles and air entrapment within the molded products.
2.The machine is equipped with an inverter-controlled hydraulic unit. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
3.All automatic operation settings are configured via the touch panel. Various operating patterns can be selected, including vacuum and non-vacuum operation, as well as cooling and non-cooling operation. The machine accommodates a wide range of applications, from research and development to mass production.
| Product (application) | Resin Molding |
| Output (ton) | 50ton |
| Stroke | 250㎜ |
| Open height | 250㎜ |
| Platen size | ▢550㎜ |
| Thickness that can be vacuumed?(真空可能厚み) | ~100㎜ |
| Cylinder | φ180㎜ |
| Maximum pressure | 19.3MPa |
| Operation speed | 3-40㎜/s |
| Heater temperature | MAX350℃ |
| Hydraulic motor capacity | 5KW |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1775㎜ x2248㎜ x2030㎜ |
| Management number | 060 |


