Preheating Molds and Materials
Production process labor saving device
![](https://www.iwa-ki.com/wpiwk/wp-content/uploads/2016/05/22-1.jpg)
This equipment preheats molds and materials.
【Features】
1.There are hot platens on the top and bottom that can be heated to 200℃.
2.This effectively reduces time for pre-staging.
3.The cylinders are air-driven facilitating movement within the factory.
Products(applications) | Preheating Molds and Materials |
Output | IYM-A(by air) |
Stroke | 250㎜ |
Open height | 300㎜ |
Platen size | 450㎜ × 450㎜ |
Mold size | 400㎜ × 400㎜ |
Mold thickness | 50 〜 300㎜ |
Cylinder | φ125㎜(Air) |
Maximum pressure | Factory air pressure 0.4-0.6MPa |
Hot platen temperature | 200℃ |
Cooling method | 2(in the press) |
Sliding table | 〇 |
Heater capacity | 5KW×2 |
Operation | Manual |
Machine size(widthxheightxdepth) | Approximately 884㎜x1992㎜x1435㎜ |