Current presses can become vacuum presses at low cost! | Iwaki Industry Co., Ltd.

Feel free to contact us.
+81-567-52-3341
languageENG

Topics

Current presses can become vacuum presses at low cost!

New developments  

By installing this device on a normal press that is currently in service it becomes a vacuum press.
You can purchase for about one-tenth of the cost of purchasing a vacuum press.

Major benefits:

  1. Change current presses into vacuum presses at the lowest cost possible.
  2. By minimizing the vacuum capacity, cycle time is vastly improved.
  3. Easily installed and removed.
  4. Able to demonstrate capacity equal to a vacuum press.
  5. Able to modify the existing press without modifying control data. (* A separate small control box will be installed)
  6. It can be installed on presses made by other companies.

 

Installing the vacuum device we developed…
can decrease defect rates for normal 4 pillar presses with very low cost.
  ctg0301Arrow Install simply on a normal pillar press to make it a vacuum press!
With standard specifications the device enables vacuum for dies up to 120mm thick.
* Able to modify the existing press without changing the sequencer data.
(Supports presses made by other companies as well)
 newProjectImage01  newProjectImage02

 

Tour our factory and try it out on our demonstration unit!

* For more details or to participate in a tour/trial, please feel free to contact us with the information below.