250-ton Vacuum Heating and Cooling Hydraulic Press (Heat Transfer Oil)

This press machine is specifically designed for vacuum molding of thermoplastic powders.
【Features】
1.Molding is performed under vacuum conditions, preventing defects such as air bubbles and enabling consistent, high-quality product manufacturing.
2.The machine is equipped with an inverter-controlled hydraulic unit, enabling precise pressure control. By controlling the motor speed, the inverter regulates the flow rate and pressure of the fixed-displacement pump, resulting in reduced energy consumption and lower heat generation.
3.Heat transfer oil is used as the heating medium to accommodate rapid heating and cooling, which are difficult to achieve with conventional cartridge heaters.
The machine is equipped with a heating and cooling unit supplied by a specialized manufacturer.
| Product (application) | 粉末 Molding |
| Output (ton) | 250ton |
| Stroke | 200㎜ |
| Open height | 300㎜ |
| Platen size | 700×700㎜ |
| Cylinder | φ400㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 1~50㎜/s |
| Inverter motor capacity | 5.5KW |
| Heater capacity | 5.5KW |
| Heater temperature | 50~250℃ |
| Heat source | Heat transfer oil |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 2000㎜ x2600㎜ x2300㎜ |
| Management number | 053 |

