100ton Hydraulic molding press machine OH
Hot press molding machinesResin press molding machinesUsed press molding machines
This is a hot press machine refurbished from a used press manufactured by another company, with all components other than the press machine body being newly manufactured.
【Features】
1.An inverter-controlled hydraulic power unit is used.
By controlling the motor speed, the inverter hydraulic unit regulates the flow rate and pressure of a fixed-displacement pump, enabling energy savings and reduced heat generation.
For information on available refurbished machines, please refer to the used machine inventory list below.
| Product (application) | Rubber molding |
| Output (ton) | 100ton |
| Stroke | 300㎜ |
| Open height | 300㎜ |
| Platen size | 510×510㎜ |
| Cylinder | φ250㎜ |
| Maximum pressure | 20.6MPa |
| Operation speed | 3-20㎜/s |
| Heater temperature | 300℃ |
| Hydraulic motor capacity | 5KW |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately 1620㎜ x1700㎜ x1700㎜ |
| Management number | 071 |